A theoretical-experimental research on the torsional behavior up to failure of reinforced concrete beams strengthened with external carbon fiber composites (CFC) was carried out. The experimental study comprises a series of seven reinforced concrete beams with the same compressive strength of concrete loaded to failure and subjected to torsion. The beams dimensions were 20 cm x 40 cm x 420 cm. The test specimens had the same internal steel reinforcement. The beams were divided in three series: the reference beam without strengthening; three beams with the external strengthening applied transversally and three beams with the external strengthening applied transversally and longitudinally. For the accomplishment of the tests an auxiliary steel structure was mounted, capable to transfer to the beams the pure torsion moment. In the theoretical study two analytical procedures were developed. The first formulation, based on the softened space truss model for torsion, presents a systematic to obtain the curve torsion moment x torsion angle per length unit of the reinforced concrete beams with CFC torsion strengthening. The second systematic, based on the Space Truss Model in accordance with the Eurocode 2, presents the design of the CFC strengthening. Both methodologies adopt the Chen and Teng bond model between concrete and CFC. The consideration of the bond in the developed models is very important because the failure of the concrete members often occurs from debonding of the CFC. The experimental results from the beams tests were used to validate the two analytical procedures. Good agreement was obtained with the experimental and analytical results. For all the strengthened beams the average values of torsion strength were increased by 40% when compared to the reference beam. After cracking, the loss of rigidity in the strengthened beams was lower then in the reference beam. The cracking angle experimentally measured and the strut angles evaluated by strain state and stress state presented close values.