$$\newcommand{\bra}[1]{\left<#1\right|}\newcommand{\ket}[1]{\left|#1\right>}\newcommand{\bk}[2]{\left<#1\middle|#2\right>}\newcommand{\bke}[3]{\left<#1\middle|#2\middle|#3\right>}$$
X
INFORMAÇÕES SOBRE DIREITOS AUTORAIS


As obras disponibilizadas nesta Biblioteca Digital foram publicadas sob expressa autorização dos respectivos autores, em conformidade com a Lei 9610/98.

A consulta aos textos, permitida por seus respectivos autores, é livre, bem como a impressão de trechos ou de um exemplar completo exclusivamente para uso próprio. Não são permitidas a impressão e a reprodução de obras completas com qualquer outra finalidade que não o uso próprio de quem imprime.

A reprodução de pequenos trechos, na forma de citações em trabalhos de terceiros que não o próprio autor do texto consultado,é permitida, na medida justificada para a compreeensão da citação e mediante a informação, junto à citação, do nome do autor do texto original, bem como da fonte da pesquisa.

A violação de direitos autorais é passível de sanções civis e penais.
Coleção Digital

Avançada


Estatísticas | Formato DC |



Título: DISPLACEMENT OF FLUIDS IN NON-STRAIGHT HORIZONTAL WELLBORE
Autor: JAQUES SAVINO
Instituição: PONTIFÍCIA UNIVERSIDADE CATÓLICA DO RIO DE JANEIRO - PUC-RIO
Colaborador(es):  PAULO ROBERTO DE SOUZA MENDES - ADVISOR
MONICA FEIJO NACCACHE - CO-ADVISOR

Nº do Conteudo: 13887
Catalogação:  20/07/2009 Idioma(s):  PORTUGUESE - BRAZIL
Tipo:  TEXT Subtipo:  THESIS
Natureza:  SCHOLARLY PUBLICATION
Nota:  Todos os dados constantes dos documentos são de inteira responsabilidade de seus autores. Os dados utilizados nas descrições dos documentos estão em conformidade com os sistemas da administração da PUC-Rio.
Referência [pt]:  https://www.maxwell.vrac.puc-rio.br/colecao.php?strSecao=resultado&nrSeq=13887@1
Referência [en]:  https://www.maxwell.vrac.puc-rio.br/colecao.php?strSecao=resultado&nrSeq=13887@2
Referência DOI:  https://doi.org/10.17771/PUCRio.acad.13887

Resumo:
The study of flows in the annulus is essential for the understanding of the cementing process of oil wells. The drilling mud must have rheological properties to guarantee a good performance in the drill lubricating/ cooling, dragging cuttings until the surface, as well as keeping the well pressure due the hydrostatic column. During the cementing, this mud must be removed and substituted by cement slurry. The cement has the function to coat the wall of the formation, promoting the mechanical stability and preventing infiltrations. The process of substitution occurs by the displacement of a fluid by another one in the annulus between the rock formation and the casing. To improve the cementing process, intermediate fluids (washing or spacers) are used between the drilling mud and the cement slurry. Therefore, it is important to know the effect of the rheology of such fluids on the displacement process. Drilling mud and cement slurry have a viscoplastic behavior. Such materials have yield stress, below which the viscosity is extremely high. However, after this limit, these materials have pseudoplastic behavior, that is, viscosity decreases as a function of the deformation rate. The washing fluid presents newtonian behavior. The rheological model SMD (Souza Mendes and Dutra) was used to describe the viscosity of the non-newtonian fluids. In this work, the process of displacement of a fluid for another one in non-straight horizontal wellbore was numerically analyzed. The drilling of horizontal wells uses a rotary steering technique aiming the drill positioning, adjusting the steering vector. However, a sine profile drilling is gotten, due to the technique of vertical compensation of the direction. Analyzed geometry will be developed in zigzag, to represent this behavior. It was used a commercial software to simulate the tree-dimensional displacement process, using the finite-volume technique, and the VOF (Volume of Fluid) method. Two steps of the process had been studied. In the first situation, the displacer fluid (non-newtonian) simulates the cement slurry while the displaced (newtonian) simulates the spacer fluid. In the second situation, the displacer fluid (newtonian) simulates the spacer fluid while the displaced (non-newtonian) simulates the drilling mud. The interface shape between the fluids has being evaluated varying the rheological properties and the flow, to determine the displacement efficiency. Accented profiles suggest an undesirable fingering of the displacer fluid through the displaced one. On the other hand, flattened profiles indicate a more efficient displacement. Based on these results, it was possible to predict which operational parameters optimize the displacement process.

Descrição Arquivo
COVER, ACKNOWLEDGEMENTS, RESUMO, ABSTRACT, SUMMARY AND LISTS  PDF
CHAPTER 1  PDF
CHAPTER 2  PDF
CHAPTER 3  PDF
CHAPTER 4  PDF
CHAPTER 5  PDF
CHAPTER 6  PDF
CHAPTER 7  PDF
REFERENCES AND APPENDICES  PDF
Logo maxwell Agora você pode usar seu login do SAU no Maxwell!!
Fechar Janela



* Esqueceu a senha:
Senha SAU, clique aqui
Senha Maxwell, clique aqui