The disposal of tailings has been a very important concern in mining companies around the world, with the main objective to protect the environment. Large quantities of tailings are generated daily in the ore processing plants, being necessary the availability of specific storage structures (tailings dam) which, depending on the industrial production, must be successively raised in their lifetime to provide higher storage capacity. Three methods of dam raising can be used: the upstream method, the downstream method and the centerline method. The upstream method, discussed in this thesis, begins with the construction of a starting dyke. After this step, the tailings are deposited upstream, forming a beach which will consolidate over time, gradually increasing the shear resistance of the waste and serving as a foundation for future raising dikes. This procedure continues until the final dam elevation is reached. This method is of simple construction and low cost, but its main disadvantage is that the raising speeds can be excessive and they may induce static liquefaction, a major cause of failure of tailing dams around the world. This dissertation investigates the liquefaction potential of a copper tailing dam, situated in Peru, making use of the empirical method proposed by Olson, based on correlations with data from SPT field tests, and the finite element method, considering the elastoplastic constitutive model UBCSand.