An experimental device was developed for the super-cooling water in cylindrical capsules study, seeking its use in term- accumulation processes. The experimental set is constituted basically by: test section, cooling system, visualization system, and data logger system. The temperature of the external fluid, or transfer fluid (FT), an alcohol aqueous solution with 50% per volume, it was maintained unchangeably with a bath controlled temperature during each test. The work was divided in four stages. The first one is about the statistical study of the super-cooling and nucleation, where 3 distinct materials were used (aluminum, acrylic and PVC) for capsules of 30 and 80 mm diameter, different roughness type, with different temperatures of FT. The second stage investigates the Cooling Rate, parameter that quantifies the falling of the temperature and it influences strongly the super-cooling and the nucleation process. In the third stage, the influence of the internal wall of the capsule was studied. In this stage, four different capsules of aluminum, with different roughness were used. Finally, in the fourth stage, visualizations of the nucleation phenomenon were accomplished. The obtained results indicate that the capsule material (conductivity and roughness) and the FT temperature has great influence in the phenomena of super-cooling and nucleation of the water in cylindrical capsules, affecting, strongly, the process of phase change.