$$\newcommand{\bra}[1]{\left<#1\right|}\newcommand{\ket}[1]{\left|#1\right>}\newcommand{\bk}[2]{\left<#1\middle|#2\right>}\newcommand{\bke}[3]{\left<#1\middle|#2\middle|#3\right>}$$
X
INFORMAÇÕES SOBRE DIREITOS AUTORAIS


As obras disponibilizadas nesta Biblioteca Digital foram publicadas sob expressa autorização dos respectivos autores, em conformidade com a Lei 9610/98.

A consulta aos textos, permitida por seus respectivos autores, é livre, bem como a impressão de trechos ou de um exemplar completo exclusivamente para uso próprio. Não são permitidas a impressão e a reprodução de obras completas com qualquer outra finalidade que não o uso próprio de quem imprime.

A reprodução de pequenos trechos, na forma de citações em trabalhos de terceiros que não o próprio autor do texto consultado,é permitida, na medida justificada para a compreeensão da citação e mediante a informação, junto à citação, do nome do autor do texto original, bem como da fonte da pesquisa.

A violação de direitos autorais é passível de sanções civis e penais.
Coleção Digital

Avançada


Estatísticas | Formato DC | MARC |



Título: WAX DEPOSITS FORMATION IN PETROLEUM PIPELINES: INVESTIGATION OF THE DEPOSIT-LIQUID INTERFACE CHARACTERISTICS
Autor: RICARDO CAVALCANTI LINHARES
Instituição: PONTIFÍCIA UNIVERSIDADE CATÓLICA DO RIO DE JANEIRO - PUC-RIO
Colaborador(es):  LUIS FERNANDO ALZUGUIR AZEVEDO - ADVISOR
Nº do Conteudo: 52883
Catalogação:  24/05/2021 Liberação: 14/02/2023 Idioma(s):  ENGLISH - UNITED STATES
Tipo:  TEXT Subtipo:  THESIS
Natureza:  SCHOLARLY PUBLICATION
Nota:  Todos os dados constantes dos documentos são de inteira responsabilidade de seus autores. Os dados utilizados nas descrições dos documentos estão em conformidade com os sistemas da administração da PUC-Rio.
Referência [pt]:  https://www.maxwell.vrac.puc-rio.br/colecao.php?strSecao=resultado&nrSeq=52883&idi=1
Referência [en]:  https://www.maxwell.vrac.puc-rio.br/colecao.php?strSecao=resultado&nrSeq=52883&idi=2
Referência DOI:  https://doi.org/10.17771/PUCRio.acad.52883

Resumo:
Wax deposition in petroleum production and transportation lines is one of the most relevant problems faced by the industry in order to assure the flow of oil and gas at the designed economical rates. Significant losses occur due to decreased production, line replacements and maintenance costs associated with cleaning operations. Wax deposit formation on the inner wall of the pipes might occur when the warm oil from the well loses heat to the cold environment, typical of deep water production operations, and its temperature reaches a critical value at which wax crystal formation occurs. This critical temperature is the WAT, wax appearance temperature. The prediction of wax deposit formation by simulation models is of fundamental importance for the proper design and operation of petroleum lines. Several wax deposition models have been developed and employed over the years, incorporating different wax deposition mechanisms. In the present work, the wax deposition phenomenon was studied employing a model fluid flowing through an annular test section, built to offer simple and well-defined boundary and initial conditions for the deposition process. Optical access to the interior of the test section allowed for the registration of images of the wax deposit formation. A miniature temperature probe was designed and employed to obtain original information on the temperature profiles within the deposit as it was formed. Also, the probe registered the transient evolution of the deposit interface temperature for different flow rates and cooling rates. The transient formation of a cloud of wax crystals over the deposit interface and carried by the flow was registered by a high frame rate camera. The temperature within this cloud was measured by the temperature probe. The results have shown that the deposit interface temperature evolves from a value equal to the WAT of the fluid measured by microscopy, rapidly reaching a constant value which is intermediate between the WAT and the solution thermodynamic phase change temperature. This information contradicts one of the key assumptions included in the molecular diffusion deposition mechanism, and widely employed in academic and industrial simulation models. Wax deposition in petroleum production and transportation lines is one of the most relevant problems faced by the industry in order to assure the flow of oil and gas at the designed economical rates. Significant losses occur due to decreased production, line replacements and maintenance costs associated with cleaning operations. Wax deposit formation on the inner wall of the pipes might occur when the warm oil from the well loses heat to the cold environment, typical of deep water production operations, and its temperature reaches a critical value at which wax crystal formation occurs. This critical temperature is the WAT, wax appearance temperature. The prediction of wax deposit formation by simulation models is of fundamental importance for the proper design and operation of petroleum lines. Several wax deposition models have been developed and employed over the years, incorporating different wax deposition mechanisms. In the present work, the wax deposition phenomenon was studied employing a model fluid flowing through an annular test section, built to offer simple and well-defined boundary and initial conditions for the deposition process. Optical access to the interior of the test section allowed for the registration of images of the wax deposit formation. A miniature temperature probe was designed and employed to obtain original information on the temperature profiles within the deposit as it was formed. Also, the probe registered the transient evolution of the deposit interface temperature for different flow rates and cooling rates. The transient formation of a cloud of wax crystals over the deposit interface and carried by the flow was registered by a high frame rate camera. The temperature within this cloud was measured by the temperature probe. The results have shown that the deposit interface temperature evolves from a value equal to the WAT of the fluid measured by microscopy, rapidly reaching a constant value which is intermediate between the WAT and the solution thermodynamic phase change temperature. This information contradicts one of the key assumptions included in the molecular diffusion deposition mechanism, and widely employed in academic and industrial simulation models.

Descrição Arquivo
COMPLETE  PDF
Logo maxwell Agora você pode usar seu login do SAU no Maxwell!!
Fechar Janela



* Esqueceu a senha:
Senha SAU, clique aqui
Senha Maxwell, clique aqui