The present work evaluates the use of two different types of AOP: the Zero-Fenton - process using zero valent iron - and UV/H2O2 for the treatment of pulp mill wastewater biologically treated. The observed parameters were BOD, COD, TOC, color and ABS280nm (measure of lignin compounds). The experiments were conducted in batch, lab scale and with real wastewater from biological treatment of a cellulose plant in Brazil. For the Fenton process, experiments were carried out according to a factorial design 23 investigating the influence of the variables pH, hydrogen peroxide dosage and zero-valent iron mass supplied by solution volume. As iron source, commercial steel wool was used in the concentrations of 5.5 g / L, 6.5 g / L and 7.5 g / L. The concentrations of hydrogen peroxide studied were 456.9 mg / L, 913.7 mg / L and 1370.6 mg / L and pH values ranged from 5.5, 6.5 and 7.5. The average removal rate was 57.1 per cent COD, 67.2 per cent COD, 90.5 per cent Color, 83.4 per cent lignin compounds and 54 per cent TOC. Also 9,52 mg/L of final BOD and 60,1 mg/L of final COD. The trials with the UV/H2O2 system, on the other hand, were conducted with the sole objective of polishing the effluent for reuse in the process. The pH used was the effluent s natural (7.5) and three excess doses of H2O2 were applied.