ETDs @PUC-Rio
| Título: | DESIGN PARAMETER FOR EVALUATION OF PILE FOUNDATION | ||||||||||||
| Autor: |
PAULA CECILIA BORGA |
||||||||||||
| Colaborador(es): |
PEDRICTO ROCHA FILHO - Orientador |
||||||||||||
| Catalogação: | 19/OUT/2001 | Língua(s): | PORTUGUESE - BRAZIL |
||||||||||
| Tipo: | TEXT | Subtipo: | THESIS | ||||||||||
| Notas: |
[pt] Todos os dados constantes dos documentos são de inteira responsabilidade de seus autores. Os dados utilizados nas descrições dos documentos estão em conformidade com os sistemas da administração da PUC-Rio. [en] All data contained in the documents are the sole responsibility of the authors. The data used in the descriptions of the documents are in conformity with the systems of the administration of PUC-Rio. |
||||||||||||
| Referência(s): |
[pt] https://www.maxwell.vrac.puc-rio.br/projetosEspeciais/ETDs/consultas/conteudo.php?strSecao=resultado&nrSeq=2037&idi=1 [en] https://www.maxwell.vrac.puc-rio.br/projetosEspeciais/ETDs/consultas/conteudo.php?strSecao=resultado&nrSeq=2037&idi=2 |
||||||||||||
| DOI: | https://doi.org/10.17771/PUCRio.acad.2037 | ||||||||||||
| Resumo: | |||||||||||||
|
The main objective of this thesis is to discuss the
applicability of in-situ tests like the Standard
Penetration Test (SPT) and the Cone Penetration Test (CPT)
to determine directly the design parameters to predict the
bearing capacity of pile foundations. In case it will be
considered the use of empirical correlation to indicate the
mechanical properties of the soil in terms of shear
resistance, and the application of these values directly in
the classic formulation based on the theory of equilibrium
limit to evaluate distinctly the shaft and the base
resistance of piles. Adaptations of these values will be
proceeded considering aspects related with the non-linear
behavior of the soil; the mechanism of load transfer and
the influence of the constructive aspects.The results
obtained through this new methodology will be compared with
experimental results, obtained from static and dynamic load
tests and also with other empiric procedures that use the
results obtained from in-situ tests to evaluate directly the
bearing capacity of deep foundations.
|
|||||||||||||
|
|||||||||||||
