Título
[pt] CARACTERIZAÇÃO DAS PROPRIEDADES MECÂNICAS DO AÇO SAE 4140 APÓS DIFERENTES TRATAMENTOS DE TÊMPERA E REVENIDO
Título
[en] CARACTHERIZATION OF MECHANICAL PROPERTIES ON SAE 4140 STEEL AFTER DIFFERENT TREATMENTS OF QUENCHING AND TEMPERING
Autor
[pt] LUIS PAULO PIRES GONCALVES RIBEIRO
Vocabulário
[pt] MICROESTRUTURA
Vocabulário
[pt] FRAGILIZACAO NO REVENIDO
Vocabulário
[pt] ENERGIA DE IMPACTO
Vocabulário
[en] MICROSTRUCTURE
Vocabulário
[en] TEMPERING EMBRITTLEMENT
Vocabulário
[en] IMPACT ENERGY
Resumo
[pt] Os aços de alta resistência e baixa liga (ARBL) pertencem
a uma classe de aços que desperta o interesse de
pesquisadores da área metal-mecânica. A pesquisa teve como
objetivos estudar a influência dos tratamentos térmicos de
têmpera e revenido sobre as propriedades do aço SAE 4140 e
avaliar o comportamento do aço SAE 4140 quando submetido
ao revenido na faixa de temperatura característica da
fragilização. Inicialmente, o material foi tratado
termicamente sob diferentes condições de têmpera e
revenido. Após a usinagem dos corpos de prova, foram
realizados ensaios de tração e energia ao impacto, bem
como caracterizações microestruturais e fractográficas. Os
resultados mostraram que as propriedades mecânicas do aço
SAE 4140 foram influenciadas pelos parâmetros de revenido,
em particular temperatura, além do tempo de permanência no
forno antes do resfriamento.
Resumo
[en] The high strength and low alloy steels (HSLA) belong to a
class of steels in which researchers of the metal-mechanic
area have particular interest. The aim of this work is to
verify the influence of quenching and tempering heat
treatments on the properties of the SAE 4140 steel as well
as to evaluate its behaviour when subjected to tempering
in a temperature range associated with the material´s
embrittlement. At first, the material was heat treated
according with different quenching and tempering
conditions. In the sequence, specimens machined from the
treated material were subjected to tensile and impact
energy tests and characterized by microstructural and
fractographic analysis. The results showed that the
mechanical properties of the material were influenced by
the tempering parameters, specially temperature and time
of treatment as well as the permanence time of the
specimens in the furnace before cooling.
Orientador(es)
MARCOS VENICIUS SOARES PEREIRA
Banca
FATHI AREF IBRAHIM DARWISH
Banca
FERNANDO RIBEIRO DA SILVA
Banca
MARCOS VENICIUS SOARES PEREIRA
Catalogação
2007-03-14
Apresentação
2006-09-06
Tipo
[pt] TEXTO
Formato
application/pdf
Formato
application/pdf
Formato
application/pdf
Formato
application/pdf
Formato
application/pdf
Formato
application/pdf
Formato
application/pdf
Idioma(s)
PORTUGUÊS
Referência [pt]
https://www.maxwell.vrac.puc-rio.br/colecao.php?strSecao=resultado&nrSeq=9657@1
Referência [en]
https://www.maxwell.vrac.puc-rio.br/colecao.php?strSecao=resultado&nrSeq=9657@2
Referência DOI
https://doi.org/10.17771/PUCRio.acad.9657
Arquivos do conteúdo
CAPA, AGRADECIMENTOS, RESUMO, ABSTRACT, SUMÁRIO E LISTAS PDF CAPÍTULO 1 PDF CAPÍTULO 2 PDF CAPÍTULO 3 PDF CAPÍTULO 4 PDF CAPÍTULO 5 PDF REFERÊNCIAS BIBLIOGRÁFICAS PDF