Título
[pt] ESTUDO DOS PARÂMETROS CINÉTICOS DURANTE O REVENIDO DE UM AÇO DE BAIXA LIGA, PARTINDO DA DILATOMETRIA NÃO ISOTÉRMICA
Título
[en] STUDY OF KINETIC PARAMETERS DURING THE TEMPERING OF LOW ALLOY STEEL, THROUGH THE NON-ISOTHERMAL DILATOMETRY
Autor
[pt] JORGE ANASTACIO VEGA LEIVA
Vocabulário
[pt] INTEGRAL DA TEMPERATURA
Vocabulário
[pt] PARAMETROS CINETICOS
Vocabulário
[pt] METODO DE FRIEDMAN
Vocabulário
[pt] METODO DE KISSINGER
Vocabulário
[pt] DILATOMETRIA ATERMICA
Vocabulário
[pt] REGRA DE ADICAO
Vocabulário
[en] INTEGRAL TEMPERATURE
Vocabulário
[en] KINETIC PARAMETERS
Vocabulário
[en] METHOD FRIEDMAN
Vocabulário
[en] METHOD OF KISSINGER
Vocabulário
[en] NON-ISOTHERMAL DILATOMETRY
Vocabulário
[en] RULES OF ADDITION
Resumo
[pt] Nesse trabalho foi realizado um estudo cinético do revenido de reações do aço de baixa liga (AISI 1050) usando a dilatometria não isotérmica. Os parâmetros cinéticos do primeiro e terceiro estado do revenido (aqui foram nomeados como processos I e II ) foram calculados assumindo que as reações obedecem ao modelo cinético de Johnson--Mehl--Avrami--Kolmogorov (JMAK) . Os formalismos mediante os quais os parâmetros cinéticos (E, n, Ko) são calculados é apresentado. Foram usados cinco formalismos para realizar o estudo . Três destes formalismos estão embasados em diferentes aproximações da integral da temperatura, um na regra de adição e um destes não usa nenhuma aproximação para o calculo. Os intervalos de confiança dos parâmetros também foram calculados. O resultado mostra que os valores calculados coincidem independentemente do método usado. Além disso, não dependem da temperatura ou da fração transformada. Conclui-se que neste caso ocorreu um processo com saturação de sítios.
Resumo
[en] In this paper we present a kinetic study of the reactions of tempering in low-alloy steel (AISI 1050), using the non-isothermal dilatometry. The kinetic parameters of the first and third state of the tempering (here were named as processes I and II) were calculated assuming that the reactions follow the kinetic model of Johnson - Mehl - Avrami - Kolmogorov (JMAK). The calculation of the parameters was not done by setting any model. The formality by which the kinetic parameters (E, n, Ko) are calculated was presented. Five formalisms have been used mainly for the study. Three of them are based on different approximations of the integral of temperature. Another method were based on addition rule .Finally the last method does not use any other approach to the calculation. The result shows that the calculated values are very similar and these values are independent of the method used. Also, do not depend on temperature or transformed fraction .In this study it was concluded that this case happened a process with saturation of sites. During the study the confidence intervals of the parameters were calculated.
Orientador(es)
IVANI DE SOUZA BOTT
Coorientador(es)
PAULO RANGEL RIOS
Banca
IVANI DE SOUZA BOTT
Banca
PAULO RANGEL RIOS
Banca
GLAUCIO SOARES DA FONSECA
Banca
WESLLEY LUIZ DA SILVA ASSIS
Catalogação
2021-10-28
Apresentação
2012-01-27
Tipo
[pt] TEXTO
Formato
application/pdf
Formato
application/pdf
Formato
application/pdf
Formato
application/pdf
Formato
application/pdf
Formato
application/pdf
Formato
application/pdf
Formato
application/pdf
Idioma(s)
PORTUGUÊS
Referência [pt]
https://www.maxwell.vrac.puc-rio.br/colecao.php?strSecao=resultado&nrSeq=55541@1
Referência [en]
https://www.maxwell.vrac.puc-rio.br/colecao.php?strSecao=resultado&nrSeq=55541@2
Referência DOI
https://doi.org/10.17771/PUCRio.acad.55541
Arquivos do conteúdo
CAPA, AGRADECIMENTOS, RESUMO, ABSTRACT, SUMÁRIO E LISTAS PDF CAPÍTULO 1 PDF CAPÍTULO 2 PDF CAPÍTULO 3 PDF CAPÍTULO 4 PDF CAPÍTULO 5 PDF CAPÍTULO 6 PDF REFERÊNCIAS BIBLIOGRÁFICAS E ANEXOS PDF