In environmental works, where geosynthetics are used as protection system and of slope covering, it is of extreme importance the knowledge of the interaction mechanism soil-geosynthetic, through the obtaining of the parameters of resistance of the interface (adhesion and interface friction angle). The laboratory test more appropriate for the obtaining of those parameters, in these conditions, is it the inclined plane test or ramp test, because it allows to simulate the field condition where the shearing happens in inclined plane under low tensions. Like this, this work presents a study about the interaction soilgeosynthetic through ramp tests, executed in an equipment of great dimensions seeking to analyze the influence of some factors, such as, geosynthetic type, soil type, relative density of the soil and confinement pressure. Two geosynthetics types, a PVC geomembrane and a uniaxial geogrid, two soil types, it sand and gravel (break). The analysis of the influence of the relative density of the soil was accomplished through tests in the interface sand- geosynthetic in two different relative densities (35 and 100%). The influence of the confinement pressure was studied through tests with three different confinement pressures (2,1; 3,2 and 5,1 kPa). The results show that the influence of factors as relative density of the soil, pressure confinement and soil type, they depend on the type of the geosynthetic. The increase of the relative density of the soil promotes an increment in the interface resistance for the geogrid and a reduction for the geomembrana. The increase of the confinement pressure reduces the ramp angle in the rupture, being this more pronounced effect in the interface sand-geogrid. In relation to the material type, the interface gravel-geogrid presents larger resistance.