XINFORMAÇÕES SOBRE DIREITOS AUTORAIS
As obras disponibilizadas nesta Biblioteca Digital foram publicadas sob expressa autorização dos respectivos autores, em conformidade com a Lei 9610/98.
A consulta aos textos, permitida por seus respectivos autores, é livre, bem como a impressão de trechos ou de um exemplar completo exclusivamente para uso próprio. Não são permitidas a impressão e a reprodução de obras completas com qualquer outra finalidade que não o uso próprio de quem imprime.
A reprodução de pequenos trechos, na forma de citações em trabalhos de terceiros que não o próprio autor do texto consultado,é permitida, na medida justificada para a compreeensão da citação e mediante a informação, junto à citação, do nome do autor do texto original, bem como da fonte da pesquisa.
A violação de direitos autorais é passível de sanções civis e penais.
As obras disponibilizadas nesta Biblioteca Digital foram publicadas sob expressa autorização dos respectivos autores, em conformidade com a Lei 9610/98.
A consulta aos textos, permitida por seus respectivos autores, é livre, bem como a impressão de trechos ou de um exemplar completo exclusivamente para uso próprio. Não são permitidas a impressão e a reprodução de obras completas com qualquer outra finalidade que não o uso próprio de quem imprime.
A reprodução de pequenos trechos, na forma de citações em trabalhos de terceiros que não o próprio autor do texto consultado,é permitida, na medida justificada para a compreeensão da citação e mediante a informação, junto à citação, do nome do autor do texto original, bem como da fonte da pesquisa.
A violação de direitos autorais é passível de sanções civis e penais.
Coleção Digital
Título: FLEXURAL BEHAVIOR OF I-SECTION TEXTILE REINFORCED CONCRETE BEAMS Autor: KISSILA BOTELHO GOLIATH
Instituição: PONTIFÍCIA UNIVERSIDADE CATÓLICA DO RIO DE JANEIRO - PUC-RIO
Colaborador(es):
DANIEL CARLOS TAISSUM CARDOSO - ADVISOR
FLAVIO DE ANDRADE SILVA - CO-ADVISOR
Nº do Conteudo: 60285
Catalogação: 22/08/2022 Liberação: 18/08/2023 Idioma(s): ENGLISH - UNITED STATES
Tipo: TEXT Subtipo: THESIS
Natureza: SCHOLARLY PUBLICATION
Nota: Todos os dados constantes dos documentos são de inteira responsabilidade de seus autores. Os dados utilizados nas descrições dos documentos estão em conformidade com os sistemas da administração da PUC-Rio.
Referência [pt]: https://www.maxwell.vrac.puc-rio.br/colecao.php?strSecao=resultado&nrSeq=60285@1
Referência [en]: https://www.maxwell.vrac.puc-rio.br/colecao.php?strSecao=resultado&nrSeq=60285@2
Referência DOI: https://doi.org/10.17771/PUCRio.acad.60285
Resumo:
Título: FLEXURAL BEHAVIOR OF I-SECTION TEXTILE REINFORCED CONCRETE BEAMS Autor: KISSILA BOTELHO GOLIATH
FLAVIO DE ANDRADE SILVA - CO-ADVISOR
Nº do Conteudo: 60285
Catalogação: 22/08/2022 Liberação: 18/08/2023 Idioma(s): ENGLISH - UNITED STATES
Tipo: TEXT Subtipo: THESIS
Natureza: SCHOLARLY PUBLICATION
Nota: Todos os dados constantes dos documentos são de inteira responsabilidade de seus autores. Os dados utilizados nas descrições dos documentos estão em conformidade com os sistemas da administração da PUC-Rio.
Referência [pt]: https://www.maxwell.vrac.puc-rio.br/colecao.php?strSecao=resultado&nrSeq=60285@1
Referência [en]: https://www.maxwell.vrac.puc-rio.br/colecao.php?strSecao=resultado&nrSeq=60285@2
Referência DOI: https://doi.org/10.17771/PUCRio.acad.60285
Resumo:
The present research aims to perform an experimental investigation on the short and
long-term flexural behavior of I-section textile reinforced concrete (TRC) beams.
Four types of carbon fabric were used, differentiated by the mesh dimensions and
yarn cross-section, as well as by the fabric coating. The samples were identified
according to the name of the coating, being styrene butadiene rubber (SBR) and
SBR impregnated with sand (SND), acrylate (ACR) and epoxy (EPX) resin.
Initially, four‐point bending tests were performed in I‐beams, considering SBR
fabric and the following conditions: (a) plain cementitious matrix; (b) plain matrix
and sand‐coated textile; and (c) strain hardening cement‐based composite (SHCC)
matrix. The main goal was to correlate the improvements on interface and matrix
properties with the crack pattern, failure mode and ductility. A theoretical method
was used to evaluate the flexural behavior of the beams and good agreement was
achieved with the experimental results. In the next step, the mechanical properties
of different types of carbon-TRC and their interface were studied through direct
tensile, pullout and compression tests. The influence of different test configurations
and the effectiveness of the parameters obtained in these tests were verified for the
performance prediction of TRC beams tested in bending in a monotonic way. The
study was able to indicate the most suitable characterization methods to derive
mechanical properties to be used in analytical methods, as well as to show the
influence of different testing parameters on the load capacity of the composite.
Finally, the long-term behavior of I-section beams reinforced with carbon fabric
under sustained loading of 4 kN was investigated. An analytical model was used to
analyze the results in terms of effective textile moduli, concrete tensile strength and
the nominal bond stress. The model showed that SBR textile is strongly affected by sustained load. SND, ACR and EPX beams formed new cracks during creep and
the reduction in effective modulus observed was not accompanied by increase in
crack width. It was confirmed the great influence of adhesion between fabric and
matrix on the load capacity of the composite, the decrease in matrix strength due to
fabric incorporation, as well as the divergence of the conditions of composite
characterization tests.
Descrição | Arquivo |
COMPLETE |