$$\newcommand{\bra}[1]{\left<#1\right|}\newcommand{\ket}[1]{\left|#1\right>}\newcommand{\bk}[2]{\left<#1\middle|#2\right>}\newcommand{\bke}[3]{\left<#1\middle|#2\middle|#3\right>}$$
X
INFORMAÇÕES SOBRE DIREITOS AUTORAIS


As obras disponibilizadas nesta Biblioteca Digital foram publicadas sob expressa autorização dos respectivos autores, em conformidade com a Lei 9610/98.

A consulta aos textos, permitida por seus respectivos autores, é livre, bem como a impressão de trechos ou de um exemplar completo exclusivamente para uso próprio. Não são permitidas a impressão e a reprodução de obras completas com qualquer outra finalidade que não o uso próprio de quem imprime.

A reprodução de pequenos trechos, na forma de citações em trabalhos de terceiros que não o próprio autor do texto consultado,é permitida, na medida justificada para a compreeensão da citação e mediante a informação, junto à citação, do nome do autor do texto original, bem como da fonte da pesquisa.

A violação de direitos autorais é passível de sanções civis e penais.
Coleção Digital

Avançada


Estatísticas | Formato DC |



Título: DEVELOPMENT OF A ROBOTIC ANGULAR MANIPULATOR FOR EMAT SCREENING
Autor: JOAO PEDRO TORRES DE SOUSA ANDRADE
Instituição: PONTIFÍCIA UNIVERSIDADE CATÓLICA DO RIO DE JANEIRO - PUC-RIO
Colaborador(es):  ALAN CONCI KUBRUSLY - ADVISOR
Nº do Conteudo: 53523
Catalogação:  02/07/2021 Idioma(s):  PORTUGUESE - BRAZIL
Tipo:  TEXT Subtipo:  SENIOR PROJECT
Natureza:  SCHOLARLY PUBLICATION
Nota:  Todos os dados constantes dos documentos são de inteira responsabilidade de seus autores. Os dados utilizados nas descrições dos documentos estão em conformidade com os sistemas da administração da PUC-Rio.
Referência [pt]:  https://www.maxwell.vrac.puc-rio.br/colecao.php?strSecao=resultado&nrSeq=53523@1
Referência [en]:  https://www.maxwell.vrac.puc-rio.br/colecao.php?strSecao=resultado&nrSeq=53523@2
Referência DOI:  https://doi.org/10.17771/PUCRio.acad.53523

Resumo:
Electromagnetic acoustic transducers (EMATs) generate ultrasonic guided waves which can be used in inspections. The development of equipment e protocols used in these inspections requires the realization of sweeps. These sweeps are procedures used to gather data in an organized way, making possible the test and comparison between different equipment and settings. Therefore, the easy with which these sweeps are made is key to the development of theses inspections technologies and non-destructive testing. In this work a robotic manipulator was developed aiming to move these EMAT transduces while a sweep is being made. The automation of this procedure requires the integration of mechanical, electrical and software components. This capstone project explores the basic concepts of EMAT transduces and the sweeps that uses them. The modeling and construction of mechanical hardware is discussed, with emphasis given to some problems that were encounter, and the utilization of components made with fused deposition modeling (FDM) 3D printing technology. It also presents the development of the electrical components need to the manipulator’s operation and the adaptation of existing software to the project specificities. At last, some results gathered with the develop tools are shown and compared to manual acquisitions. The conclusion reached was that the arm worked as expected. Although there are some points to evolve, it was possible to reliably make screenings with less than a third of the usual necessary time. Other than that, some recommendations for future development are made.

Descrição Arquivo
COMPLETE  PDF
Logo maxwell Agora você pode usar seu login do SAU no Maxwell!!
Fechar Janela



* Esqueceu a senha:
Senha SAU, clique aqui
Senha Maxwell, clique aqui