$$\newcommand{\bra}[1]{\left<#1\right|}\newcommand{\ket}[1]{\left|#1\right>}\newcommand{\bk}[2]{\left<#1\middle|#2\right>}\newcommand{\bke}[3]{\left<#1\middle|#2\middle|#3\right>}$$
X
INFORMAÇÕES SOBRE DIREITOS AUTORAIS


As obras disponibilizadas nesta Biblioteca Digital foram publicadas sob expressa autorização dos respectivos autores, em conformidade com a Lei 9610/98.

A consulta aos textos, permitida por seus respectivos autores, é livre, bem como a impressão de trechos ou de um exemplar completo exclusivamente para uso próprio. Não são permitidas a impressão e a reprodução de obras completas com qualquer outra finalidade que não o uso próprio de quem imprime.

A reprodução de pequenos trechos, na forma de citações em trabalhos de terceiros que não o próprio autor do texto consultado,é permitida, na medida justificada para a compreeensão da citação e mediante a informação, junto à citação, do nome do autor do texto original, bem como da fonte da pesquisa.

A violação de direitos autorais é passível de sanções civis e penais.
Coleção Digital

Avançada


Formato DC |



Título: CHARACTERIZATION OF CARBON-STEEL JOINTS WELDED BY TWO-LAYER DEPOSITION TECHNIQUE AND EXPOSED TO H2S
Autor: PAULO ROBERTO MANSO VIEIRA
Instituição: PONTIFÍCIA UNIVERSIDADE CATÓLICA DO RIO DE JANEIRO - PUC-RIO
Colaborador(es):  IVAN GUILLERMO SOLORZANO NARANJO - ADVISOR
Nº do Conteudo: 5076
Catalogação:  23/06/2004 Idioma(s):  PORTUGUESE - BRAZIL
Tipo:  TEXT Subtipo:  THESIS
Natureza:  SCHOLARLY PUBLICATION
Nota:  Todos os dados constantes dos documentos são de inteira responsabilidade de seus autores. Os dados utilizados nas descrições dos documentos estão em conformidade com os sistemas da administração da PUC-Rio.
Referência [pt]:  https://www.maxwell.vrac.puc-rio.br/colecao.php?strSecao=resultado&nrSeq=5076@1
Referência [en]:  https://www.maxwell.vrac.puc-rio.br/colecao.php?strSecao=resultado&nrSeq=5076@2
Referência DOI:  https://doi.org/10.17771/PUCRio.acad.5076

Resumo:
In petroleum industry, steel pipes that conduct products are frequently submitted to the H2S action, that produces steel atomic hydrogen diffusion and embrittlement. The post- welding heat treatment, predicted in welding procedures qualified by Petrobras, reduce the dangerous hydrogen effect when joint is in contact with H2S, by reducing existing residual internal stresses level. This thesis studies a top joint performance when welded by two different techniques:Conventional, with tempering after welding, and Two-Layer Deposition, without post-welding heat treatment to internal stresses relief. In the last case, the residual stresses produced during welding deposition are reduced by action of second layer, what reduces maintenance costs and increase the equipments availability. This welding procedure increase the welded joint life too, by reducing grain size and increasing toughness of thermal affected zone. By X-ray diffraction methode, were measured internal stresses deriving from welding process and H2S exposition, to detect the efficacy of stress relief made on identical joints welded by the two refered procedures. They were also investigated existing microcracks, observed resultant microstructures by optical and scanning electron microscopy, measured microhardnesses and compared grain sizes in joints regions welded by both procedures. Then, samples were analysed by transmission electron microscopy to evaluate itself existing dislocations level, responsible by internal tension level existing at regions from welded zone that were inable to be measured by X-ray methode. Results obtained showed a major stress relief state and a relatively lowest grain size in joints welded by Conventional welding process. There was detected neither microcracks nor an important dislocations level and the microhardnesses showed higher values on the biggest grains at the thermal affected zones. It´s necessary to make more residual stresses measures to give a statistical support to decision about what is the most adequate welding procedure. From the operational point-of- view, these results suggest the necessity of a better parameters control process by the welder, in the case of alternative welding procedure proposed, the Two-Layer Deposition Technique.

Descrição Arquivo
COVER, ACKNOWLEDGEMENTS, RESUMO, ABSTRACT, SUMMARY AND LISTS  PDF  
CHAPTER 1  PDF  
CHAPTER 2  PDF  
CHAPTER 3  PDF  
CHAPTER 4  PDF  
CHAPTER 5  PDF  
CHAPTER 6  PDF  
REFERENCES AND ANNEX  PDF  
Logo maxwell Agora você pode usar seu login do SAU no Maxwell!!
Fechar Janela



* Esqueceu a senha:
Senha SAU, clique aqui
Senha Maxwell, clique aqui