$$\newcommand{\bra}[1]{\left<#1\right|}\newcommand{\ket}[1]{\left|#1\right>}\newcommand{\bk}[2]{\left<#1\middle|#2\right>}\newcommand{\bke}[3]{\left<#1\middle|#2\middle|#3\right>}$$
X
INFORMAÇÕES SOBRE DIREITOS AUTORAIS


As obras disponibilizadas nesta Biblioteca Digital foram publicadas sob expressa autorização dos respectivos autores, em conformidade com a Lei 9610/98.

A consulta aos textos, permitida por seus respectivos autores, é livre, bem como a impressão de trechos ou de um exemplar completo exclusivamente para uso próprio. Não são permitidas a impressão e a reprodução de obras completas com qualquer outra finalidade que não o uso próprio de quem imprime.

A reprodução de pequenos trechos, na forma de citações em trabalhos de terceiros que não o próprio autor do texto consultado,é permitida, na medida justificada para a compreeensão da citação e mediante a informação, junto à citação, do nome do autor do texto original, bem como da fonte da pesquisa.

A violação de direitos autorais é passível de sanções civis e penais.
Coleção Digital

Avançada


Estatísticas | Formato DC |



Título: APPLICATION OF J-INTEGRAL IN STEELS OF DIFFERENT YIELD LIMITS
Autor: THAIS MOTTA DA SILVA
Instituição: PONTIFÍCIA UNIVERSIDADE CATÓLICA DO RIO DE JANEIRO - PUC-RIO
Colaborador(es):  MARCOS VENICIUS SOARES PEREIRA - ADVISOR
ANDRE LUIS MOREIRA DE CARVALHO - CO-ADVISOR

Nº do Conteudo: 36321
Catalogação:  28/01/2019 Idioma(s):  PORTUGUESE - BRAZIL
Tipo:  TEXT Subtipo:  THESIS
Natureza:  SCHOLARLY PUBLICATION
Nota:  Todos os dados constantes dos documentos são de inteira responsabilidade de seus autores. Os dados utilizados nas descrições dos documentos estão em conformidade com os sistemas da administração da PUC-Rio.
Referência [pt]:  https://www.maxwell.vrac.puc-rio.br/colecao.php?strSecao=resultado&nrSeq=36321@1
Referência [en]:  https://www.maxwell.vrac.puc-rio.br/colecao.php?strSecao=resultado&nrSeq=36321@2
Referência DOI:  https://doi.org/10.17771/PUCRio.acad.36321

Resumo:
The study of resistance to fracture of the materials is very important for developing new projects, making materials specifications and also for evaluating materials behaviour under presence of a crack in a component. There are uncountables standards which apply normalized specimens due to determine this mechanical property, however some components in service doesn t act under same conditions as the specimen chosen, for instance ductile materials applied in components with thin thickness and high intern pressure. In this dissertation was studied two diferente of materials with distinct yield limits fabricated according to SEN(T) geometry with clamped fixing, which one is not acceptable by ASTM. Thus, a research has been carried out using this geomerty with a variation of 0,2 to 0,8 of the relation between the idealized initially for the crack and the width of the proof body ratio and side-grooves with 20 percent reducted were made in the specimens with higher ductility. After that, the procedure for doing fatigue pre-crack was initialized, followed by fracture toughness test. This last one was developed adopting the unloading compliance technique, which one allows that more than one aplications of force and displacement can be realized in only one specimen then the value of J and crack extension can be calculated and the R-curve will be plotted. The results obtained showed even with a a/W ratio diferente of those indicated by standards, is possible to constructo a qualified R-curve for a/W=0,2. In additon to the results, there is a limitation in applying a SEN(T) geometry in materials that don t present extensive ductility.

Descrição Arquivo
COMPLETE  PDF
Logo maxwell Agora você pode usar seu login do SAU no Maxwell!!
Fechar Janela



* Esqueceu a senha:
Senha SAU, clique aqui
Senha Maxwell, clique aqui