$$\newcommand{\bra}[1]{\left<#1\right|}\newcommand{\ket}[1]{\left|#1\right>}\newcommand{\bk}[2]{\left<#1\middle|#2\right>}\newcommand{\bke}[3]{\left<#1\middle|#2\middle|#3\right>}$$
X
INFORMAÇÕES SOBRE DIREITOS AUTORAIS


As obras disponibilizadas nesta Biblioteca Digital foram publicadas sob expressa autorização dos respectivos autores, em conformidade com a Lei 9610/98.

A consulta aos textos, permitida por seus respectivos autores, é livre, bem como a impressão de trechos ou de um exemplar completo exclusivamente para uso próprio. Não são permitidas a impressão e a reprodução de obras completas com qualquer outra finalidade que não o uso próprio de quem imprime.

A reprodução de pequenos trechos, na forma de citações em trabalhos de terceiros que não o próprio autor do texto consultado,é permitida, na medida justificada para a compreeensão da citação e mediante a informação, junto à citação, do nome do autor do texto original, bem como da fonte da pesquisa.

A violação de direitos autorais é passível de sanções civis e penais.
Coleção Digital

Avançada


Formato DC |



Título: HEAT TRANSFER AND HEAD LOSS IN THE TURBULENT FLOW OF INTERNALLY RIBBED TUBES
Autor: MARCOS HENRIQUE DE PINHO MAURICIO
Instituição: PONTIFÍCIA UNIVERSIDADE CATÓLICA DO RIO DE JANEIRO - PUC-RIO
Colaborador(es):  PAULO ROBERTO DE SOUZA MENDES - ADVISOR
Nº do Conteudo: 33263
Catalogação:  13/03/2018 Idioma(s):  PORTUGUESE - BRAZIL
Tipo:  TEXT Subtipo:  THESIS
Natureza:  SCHOLARLY PUBLICATION
Nota:  Todos os dados constantes dos documentos são de inteira responsabilidade de seus autores. Os dados utilizados nas descrições dos documentos estão em conformidade com os sistemas da administração da PUC-Rio.
Referência [pt]:  https://www.maxwell.vrac.puc-rio.br/colecao.php?strSecao=resultado&nrSeq=33263@1
Referência [en]:  https://www.maxwell.vrac.puc-rio.br/colecao.php?strSecao=resultado&nrSeq=33263@2
Referência DOI:  https://doi.org/10.17771/PUCRio.acad.33263

Resumo:
Heat transfer coefficients and pressure drop data were determine experimentally for turbulent flow in circular ducts equipped with internal transverse ribs. Both fully developed and entrance region results were obtained. The effects of the rib height, rib spacing, and Reynolds number were investigated. The Reynolds number ranged from 5,000 to 75,000, whereas the pitch p/H was varied in the range 4 to 15. Two rib heights were investigated, namely, 0.05 e 0,10 times the tube inside diameter. The friction factor for the periodic geometric was found to be always much larger than the smooth tube friction factor, increasing rapidly with H/D. For the tubes with short ribs, the friction factor decreases with increasing pitch, but the opposite is true for the tall ribbed tubes in the range investigated. For H/D = 0.05, tha heat transfer coefficient is highest for values of p/H around 10 and low Reynolds number. For H/D = 0,10, the highest heat transfer coefficients measured were for p/H = 10, where it was found to be nearly independent of the Reynolds number. Performance comparisons between the ribbed and smooth tubes were made under two types of constraints, namely, equal mass flow rate and equal pump power. It was found that the ribbed tubes have higher heat transfer perFormance for all cases investigated, except for H/D = 0.10 with Re > 60,000.

Descrição Arquivo
COMPLETE  PDF  
Logo maxwell Agora você pode usar seu login do SAU no Maxwell!!
Fechar Janela



* Esqueceu a senha:
Senha SAU, clique aqui
Senha Maxwell, clique aqui