$$\newcommand{\bra}[1]{\left<#1\right|}\newcommand{\ket}[1]{\left|#1\right>}\newcommand{\bk}[2]{\left<#1\middle|#2\right>}\newcommand{\bke}[3]{\left<#1\middle|#2\middle|#3\right>}$$
X
INFORMAÇÕES SOBRE DIREITOS AUTORAIS


As obras disponibilizadas nesta Biblioteca Digital foram publicadas sob expressa autorização dos respectivos autores, em conformidade com a Lei 9610/98.

A consulta aos textos, permitida por seus respectivos autores, é livre, bem como a impressão de trechos ou de um exemplar completo exclusivamente para uso próprio. Não são permitidas a impressão e a reprodução de obras completas com qualquer outra finalidade que não o uso próprio de quem imprime.

A reprodução de pequenos trechos, na forma de citações em trabalhos de terceiros que não o próprio autor do texto consultado,é permitida, na medida justificada para a compreeensão da citação e mediante a informação, junto à citação, do nome do autor do texto original, bem como da fonte da pesquisa.

A violação de direitos autorais é passível de sanções civis e penais.
Coleção Digital

Avançada


Formato DC |



Título: LONGITUDINAL DYNAMICS AND TRACTION CONTROL APPLIED TO A FOUR-WHEEL DRIVE (4WD) VEHICLE
Autor: GUILHERME MACHADO PEREIRA
Instituição: PONTIFÍCIA UNIVERSIDADE CATÓLICA DO RIO DE JANEIRO - PUC-RIO
Colaborador(es):  MAURO SPERANZA NETO - ADVISOR
RICARDO TEIXEIRA DA COSTA NETO - ADVISOR

Nº do Conteudo: 21709
Catalogação:  02/07/2013 Idioma(s):  PORTUGUESE - BRAZIL
Tipo:  TEXT Subtipo:  SENIOR PROJECT
Natureza:  SCHOLARLY PUBLICATION
Nota:  Todos os dados constantes dos documentos são de inteira responsabilidade de seus autores. Os dados utilizados nas descrições dos documentos estão em conformidade com os sistemas da administração da PUC-Rio.
Referência [pt]:  https://www.maxwell.vrac.puc-rio.br/colecao.php?strSecao=resultado&nrSeq=21709@1
Referência [en]:  https://www.maxwell.vrac.puc-rio.br/colecao.php?strSecao=resultado&nrSeq=21709@2
Referência DOI:  https://doi.org/10.17771/PUCRio.acad.21709

Resumo:
This work aimed to model and simulate the performance of an automotive vehicle operating at full load, i.e. full throttle. The first stage of the project consisted of the Transmission Matching: set gear and differential ratios in order to adapt the vehicle’s behavior as desired. For this purpose, it was necessary to build a table including various vehicle parameters such as torque, engine speed, speed, acceleration, resistive forces, among others. This table was then introduced in Microsoft Excel to simulate the behavior of the vehicle starting from the steady state at full throttle until it reaches its maximum speed. From the engine performance map and three different scenarios (underrevving, optimal and overrevving design), it was possible to define the gear and differential ratios, as well as the graphics performance of the vehicle for each desired configuration. The second stage of this project consisted of a more accurate simulation of the vehicle’s longitudinal dynamics during its development at full load. The virtual simulation tool Simulink, combined with its toolbox SimDriveline, was essential for considering some mechanical and dynamic aspects ignored by Excel, such as friction and inertia of the bearings and tire relative slip. The main purpose of this stage was to introduce a Traction Control System (TCS) on the four-wheel drive (4WD) vehicle and analyze the improvement in its performance. The parameters obtained in the Matching were used in this simulation in order to compare the resulting graphs with and without the wheel slip control.

Descrição Arquivo
COMPLETE  PDF  
Logo maxwell Agora você pode usar seu login do SAU no Maxwell!!
Fechar Janela



* Esqueceu a senha:
Senha SAU, clique aqui
Senha Maxwell, clique aqui