$$\newcommand{\bra}[1]{\left<#1\right|}\newcommand{\ket}[1]{\left|#1\right>}\newcommand{\bk}[2]{\left<#1\middle|#2\right>}\newcommand{\bke}[3]{\left<#1\middle|#2\middle|#3\right>}$$
X
INFORMAÇÕES SOBRE DIREITOS AUTORAIS


As obras disponibilizadas nesta Biblioteca Digital foram publicadas sob expressa autorização dos respectivos autores, em conformidade com a Lei 9610/98.

A consulta aos textos, permitida por seus respectivos autores, é livre, bem como a impressão de trechos ou de um exemplar completo exclusivamente para uso próprio. Não são permitidas a impressão e a reprodução de obras completas com qualquer outra finalidade que não o uso próprio de quem imprime.

A reprodução de pequenos trechos, na forma de citações em trabalhos de terceiros que não o próprio autor do texto consultado,é permitida, na medida justificada para a compreeensão da citação e mediante a informação, junto à citação, do nome do autor do texto original, bem como da fonte da pesquisa.

A violação de direitos autorais é passível de sanções civis e penais.
Coleção Digital

Avançada


Estatísticas | Formato DC |



Título: MODELING OF EVAPORATORS TYPE LAMINATED PLATE FOR AUTOMOTIVE AIR CONDITIONING SYSTEMS
Autor: PAUL ORTEGA SOTOMAYOR
Instituição: PONTIFÍCIA UNIVERSIDADE CATÓLICA DO RIO DE JANEIRO - PUC-RIO
Colaborador(es):  JOSE ALBERTO DOS REIS PARISE - ADVISOR
FRANK CHAVIANO PRUZAESKY - CO-ADVISOR
SAMUEL F. YANNA MOTTA - CO-ADVISOR

Nº do Conteudo: 12431
Catalogação:  30/10/2008 Idioma(s):  PORTUGUESE - BRAZIL
Tipo:  TEXT Subtipo:  THESIS
Natureza:  SCHOLARLY PUBLICATION
Nota:  Todos os dados constantes dos documentos são de inteira responsabilidade de seus autores. Os dados utilizados nas descrições dos documentos estão em conformidade com os sistemas da administração da PUC-Rio.
Referência [pt]:  https://www.maxwell.vrac.puc-rio.br/colecao.php?strSecao=resultado&nrSeq=12431@1
Referência [en]:  https://www.maxwell.vrac.puc-rio.br/colecao.php?strSecao=resultado&nrSeq=12431@2
Referência DOI:  https://doi.org/10.17771/PUCRio.acad.12431

Resumo:
A simulation model for automotive brazed laminate plate evaporators, for humid air cooling, was developed. The model adopts the local analysis method, where the heat exchanger is divided into a number of elemental control volumes, for which the equations of heat transfer and conservation of energy are applied. In order to determine the local heat transfer coefficient and friction factor, the model considers different regions in the heat exchanger. In the refrigerant side, two-phase or superheated flows were considered. In the air side, dry or wet surface conditions were modeled. For each zone different mechanisms of heat transfer and pressure drop were taken in account. The simulation model assumed prescribed evaporator geometry and inlet conditions for both fluids. A computer program was developed in FORTRAN to calculate overall thermodynamic outlet states of both fluids. Refrigerant properties were calculated using the software REFPROP version 7.0, developed by the NIST, U.S.A.. It allowed the modeling of the evaporator, operating with a vast range of refrigerants. New refrigerants, fluids H and 1234yf, (still not available in REFPROP v07 libraries) also were tested. The results of the simulation were compared with available experimental data.

Descrição Arquivo
COVER, ACKNOWLEDGEMENTS, RESUMO, ABSTRACT, SUMMARY AND LISTS  PDF
CHAPTER 1  PDF
CHAPTER 2  PDF
CHAPTER 3  PDF
CHAPTER 4  PDF
CHAPTER 5  PDF
CHAPTER 6  PDF
REFERENCES AND APPENDICES  PDF
Logo maxwell Agora você pode usar seu login do SAU no Maxwell!!
Fechar Janela



* Esqueceu a senha:
Senha SAU, clique aqui
Senha Maxwell, clique aqui