The objective of this work is to evaluate the groundwater contamination due to heavy metals from the Waste Disposal Area (WDA) in the municipality of Resende, RJ. The scope consists of a preliminary assessment based on surveying and mapping spatial data; in situ and laboratory investigation, including the installation of monitoring wells, sampling and characterization of soils, groundwater and waste leachate, hydraulic conductivity tests, K; and contaminant plume modelling using the program MIKE SHE. Overall, the characterization revealed sandy clays, sandy silts and silty sands. The predominant minerals were quartz, kaolinite, and muscovite along with the presence of biotite and feldspar. The values of K varied from 10(-5) to 10(-6) m/s; the pH between 4.59 and 6.93 (groundwater) and 7.93 and 8.16 (leachate); the electrical conductivity in the water varied from 0.032 to 7.113 mS/cm, consistent with the total dissolved solids and with higher values attributed to the leachate and the well closest to the WDA. Analysis detected 14 dissolved metals (Al, As, B, Ba, Cd, Co, Cr, Fe, Hg, Mn, Ni, Pb, Se and Zn) with concentrations above the legal limit. The model illustrated how the soils spatial distribution and anisotropy influence the flow and transport of chloride (advective) and chromium (sorption). When considering anisotropic soils, the Clplume reached the Paraíba do Sul River, 2.5 km away, in 43 years while the Cr plume only moved 55 m from the source. Although the experimental results were not clear in determining whether all the metals found necessarily originated from the contaminant source from the WDA or from natural origins, the simulations of this model indicated a low environmental impact to the river.