$$\newcommand{\bra}[1]{\left<#1\right|}\newcommand{\ket}[1]{\left|#1\right>}\newcommand{\bk}[2]{\left<#1\middle|#2\right>}\newcommand{\bke}[3]{\left<#1\middle|#2\middle|#3\right>}$$
X
INFORMAÇÕES SOBRE DIREITOS AUTORAIS


As obras disponibilizadas nesta Biblioteca Digital foram publicadas sob expressa autorização dos respectivos autores, em conformidade com a Lei 9610/98.

A consulta aos textos, permitida por seus respectivos autores, é livre, bem como a impressão de trechos ou de um exemplar completo exclusivamente para uso próprio. Não são permitidas a impressão e a reprodução de obras completas com qualquer outra finalidade que não o uso próprio de quem imprime.

A reprodução de pequenos trechos, na forma de citações em trabalhos de terceiros que não o próprio autor do texto consultado,é permitida, na medida justificada para a compreeensão da citação e mediante a informação, junto à citação, do nome do autor do texto original, bem como da fonte da pesquisa.

A violação de direitos autorais é passível de sanções civis e penais.
Coleção Digital

Avançada


Estatísticas | Formato DC | MARC |



Título: MECHANICAL BEHAVIOR OF ULTRA-HIGH PERFORMANCE CONCRETE BEAMS
Autor: PATRICIA BARRETO DE LIMA
Instituição: PONTIFÍCIA UNIVERSIDADE CATÓLICA DO RIO DE JANEIRO - PUC-RIO
Colaborador(es):  DANIEL CARLOS TAISSUM CARDOSO - ADVISOR
FLAVIO DE ANDRADE SILVA - CO-ADVISOR

Nº do Conteudo: 56904
Catalogação:  03/01/2022 Liberação: 17/11/2022 Idioma(s):  PORTUGUESE - BRAZIL
Tipo:  TEXT Subtipo:  THESIS
Natureza:  SCHOLARLY PUBLICATION
Nota:  Todos os dados constantes dos documentos são de inteira responsabilidade de seus autores. Os dados utilizados nas descrições dos documentos estão em conformidade com os sistemas da administração da PUC-Rio.
Referência [pt]:  https://www.maxwell.vrac.puc-rio.br/colecao.php?strSecao=resultado&nrSeq=56904&idi=1
Referência [en]:  https://www.maxwell.vrac.puc-rio.br/colecao.php?strSecao=resultado&nrSeq=56904&idi=2
Referência DOI:  https://doi.org/10.17771/PUCRio.acad.56904

Resumo:
The present work evaluates the effect of the use of ultra-high performance concrete (UHPC) in structural elements, analyzing its behavior to bending and the impact of the use of this material on its dimensioning. Through tests of characterization of the material, its mechanical properties were studied. The results of the tests already presented compressive strength of 104 Mpa at 7 days of age and 142 Mpa at 28 days of age, in addition to an increase in load capacity and ductility of the specimens with the increase in the amount of fibers used in the UHPC. In the structural scale, four reinforced concrete beams were analyzed, two of which were produced with ultra-high performance concrete and two with conventional concrete (CC), with an armor rate of 0.44 percent and 1.78 percent. First, a comparative analysis of the results of the moments obtained experimentally and theoretically (based on the norms NBR 6118:2014, ACI 544.4R-18 and Model Code 2010) was performed, with no significant difference. Subsequently, through the results of the tests it was possible to verify that the use of UHPC improves, in general, the mechanical properties of the analyzed elements. The use of UHPC in underarmed beams presents similar results to beams normally armed with CC. In addition, when combined with the use of UHPC with increased reinforcement rate, the results improve significantly, presenting, for example, a gain in load capacity of approximately 40 percent in the increase in the geometric rate of reinforcements and 75 percent with the increase in the reinforcement rate combined with the use of UHPC.

Descrição Arquivo
COMPLETE  PDF
Logo maxwell Agora você pode usar seu login do SAU no Maxwell!!
Fechar Janela



* Esqueceu a senha:
Senha SAU, clique aqui