The present work is concerned with modeling interdigital piezoeletric actuators for the excitation of guide waves in composite laminated beams. The proposed model is based on Reddys layerwise laminate theory, which relies on piece- wise constant interpolations of the displacement and eletric potential distributions along thethickness of a laminated structure. The laminated beam is also divided in pieces along its span direction, and each piece is represented by an impedance matrix that associates generalized forces with particle velocities on the interfaces of each piece, and also with the applied voltage along the electrodes of the piezoeletric element. Validation of the model was performed with the aid of a commercial Finite Element code. The model was explored to simulate the excitation of uncoupled guided wave modes incomposite laminated beams fabricated from aluminum or ARALL, which is a laminate made ofalternating layers of aluminum and arami-epoxy fiber reinforced composite. From the frequency spectrum of guided waves in the laminated beam, frequencies amd wavelengths at which the first six modes are approximately non-dispersive where determined. With this information, interdigital actuators, capable of generating uncoupled, or weakly coupled, guided modes in the beam were simulated. The proposed model, which is able to accurately reproduce responses in the high frequency/short wavelength range, could be easily adapted to simulate the extation of Lamb waves in laminated plates, and may be a valuable tool in the development of interdigital actuators for health monitoring of laminated composites.