This work presents results of na experimental research programme executed in the laboratory at PUC-Rio, Brazil. The aim of this research was investigated the stress-strain behaviour and the evaluation of the susceptibility of fine grained tailing material from Fernandinho Mine to liquefaction. This mine is at Quadrilatero Ferrífero (Minas Gerais - Brazil), region with one of the largest sources of iron ore in Brazil.In order to study the susceptibility to liquefaction of tailing material an servocontrolled triaxial device was developed. This device were composed by: triaxial cell, servo-motors,pressure regulators, microcomputer, one digital analogy convert of, one analogy digital convert developed in the laboratory at PUC-Rio and other accessories. During the development of the device, one software to control all the trajetories was implemented. Using this device some cyclic and monotonic triaxial tests were carried out.Complete characterization, mineralogical and eletronic microscope analysis were carried out in the preliminary steps of this research. After this, an extensive programme of triaxial tests were carried out in order to determine the failure envelope, stress-strain behaviour and liquifiction resitance of the tailing material.A colapsive behavior of the tested material was observed at small strain and stress conditions. Another important observation was the high level of poropressure development,suggesting that this material is susceptible to liquefaction in special conditions.Finally, based on the test results, a new methodology is proposed to investigate soils when submitted to undrained conditions.