$$\newcommand{\bra}[1]{\left<#1\right|}\newcommand{\ket}[1]{\left|#1\right>}\newcommand{\bk}[2]{\left<#1\middle|#2\right>}\newcommand{\bke}[3]{\left<#1\middle|#2\middle|#3\right>}$$
X
INFORMAÇÕES SOBRE DIREITOS AUTORAIS


As obras disponibilizadas nesta Biblioteca Digital foram publicadas sob expressa autorização dos respectivos autores, em conformidade com a Lei 9610/98.

A consulta aos textos, permitida por seus respectivos autores, é livre, bem como a impressão de trechos ou de um exemplar completo exclusivamente para uso próprio. Não são permitidas a impressão e a reprodução de obras completas com qualquer outra finalidade que não o uso próprio de quem imprime.

A reprodução de pequenos trechos, na forma de citações em trabalhos de terceiros que não o próprio autor do texto consultado,é permitida, na medida justificada para a compreeensão da citação e mediante a informação, junto à citação, do nome do autor do texto original, bem como da fonte da pesquisa.

A violação de direitos autorais é passível de sanções civis e penais.
Coleção Digital

Avançada


Estatísticas | Formato DC |



Título: TRIDIMENTIONAL CHARACTERIZATION OF POLYMER MATRIX GLASS FIBER REINFORCED COMPOSITES
Autor: LORENLEYN DE LA HOZ ALFORD
Instituição: PONTIFÍCIA UNIVERSIDADE CATÓLICA DO RIO DE JANEIRO - PUC-RIO
Colaborador(es):  SIDNEI PACIORNIK - ADVISOR
JOSE ROBERTO MORAES D ALMEIDA - CO-ADVISOR

Nº do Conteudo: 29681
Catalogação:  18/04/2017 Idioma(s):  PORTUGUESE - BRAZIL
Tipo:  TEXT Subtipo:  THESIS
Natureza:  SCHOLARLY PUBLICATION
Nota:  Todos os dados constantes dos documentos são de inteira responsabilidade de seus autores. Os dados utilizados nas descrições dos documentos estão em conformidade com os sistemas da administração da PUC-Rio.
Referência [pt]:  https://www.maxwell.vrac.puc-rio.br/colecao.php?strSecao=resultado&nrSeq=29681@1
Referência [en]:  https://www.maxwell.vrac.puc-rio.br/colecao.php?strSecao=resultado&nrSeq=29681@2
Referência DOI:  https://doi.org/10.17771/PUCRio.acad.29681

Resumo:
Composites are typically no homogeneous and anisotropic materials, both from the point of microstructural view as well mechanical properties. The failure mechanisms are affected by the spatial distribution and quality of the adhesion the interface matrix-reinforcement. The traditional techniques of microscopic characterization are enough limited to characterize this type of material since sections or two-dimensional projections may not fully reveal the anisotropic microstructure. When search to understand the origin of failure mechanisms, these limitations are even more important. In the present work, a three-dimensional characterization methodology based on X-ray microtomography was developed. The material evaluated was an epoxy matrix composite reinforced with glass fibers unidirectionally aligned. The samples (CP) were tomographed before and after the bending tests at different loads. The 3D images were analyzed to identify and quantify voids and cracks, both defects were originated in the process of manufacturing as were generated during the mechanical tests. A 3D registration procedure was developed between the sample images obtained before and after the bending tests, in the elastic range and after the failure. An assessment of the uncertainty of the procedure was performed doing more than one tomography of the samples as received, registering and comparing the resulting 3D images. The results showed a clear increase in the volume of the defects after material failure. The 3D visualization of specific regions of the tomographies allowed the identification of the formation and the growth of these defects generated by the mechanical stress.

Descrição Arquivo
COMPLETE  PDF
Logo maxwell Agora você pode usar seu login do SAU no Maxwell!!
Fechar Janela



* Esqueceu a senha:
Senha SAU, clique aqui
Senha Maxwell, clique aqui