This study presents the behavior of soils reinforced with EPS (Expanded Polystyrene) beads through experimental study. The soils used were a coluvionar soil, a clean and barely graduated sand and bentonite. Physical characterization, Standard Proctor, consolidated drained triaxial and direct shear tests were performed to establish patterns of behavior that may explain the influence of the addition of expanded polystyrene beads, linking it with shear strength parameters. The CID triaxial was performed on samples of clayey soil compacted within the maximum dry density and optimum moisture content with expanded polystyrene beads ratios of 0 percent, 0.25 percent, 0.50 percent, 0.75 percent and 1 percent by dry weight of soil. CID triaxial tests on sand samples were made to a relative density of 50 per cent and 10 per cent of moisture content, with EPS beads ratios of 0 percent, 0.50 percent and 0.75 percent by dry weight of soil. The direct shear tests with bentonite were made with EPS beads ratios of 0 percent, 0.50 percent and 0.75 percent by dry weight of soil. The results showed that the kind of soil, the EPS content and level of confining stress level influence positively on the final mechanical behavior of the composites with respect to strength parameters, but there is no well-defined pattern of behavior to examine each factor independently. Therefore, the use of EPS beads in geotechnical works, contribute to lower consumption of natural material and the consequent reduction in transport costs and volume of mobilized material.